GW55D-1/2 Rebar bender
- Courier
- In detail
- Type of machineFor bending long products
COMPONENTS:
MOTOR TYPE:Y2 100L-4 (Brake motor)
MOTOR POWER:4.0kw-4P
GEAR BOX:C45 steel
INSIDE GEAR:C45 steel
GEAR SHAFT:C45 steel
WORKING DISK:C45 steel
STOP GAUGE:CR40 steel
PILE HEAD:CR40 steel
PILE HEAD CASING:C40 steel
EXTERNAL CASE:Q235
*All the main components undergone the required heat treatment
(quenching, tempering or high frequency).
PRODUCT INTRODUCTION
The working disk is inserted into the working table which made the external appearance pleasant at sight and the operation easier to handle.
Adopted the fully enclosed type case so that distortions, which happen under the condition of heavy load, can be avoided.
GEAR, GEAR SHAFT, WORKING DISK, STOP GAUGE and PILE HEAD are made of high quality ALLOY STEEL which has undergone the required heat treatment (quenching, tempering or high frequency).
The AUTOMATIC model adopt the Brake Motor and the insert-pin type location disk which gives convenience of the radius adjustment and high accuracy of the bending angle also after stopping and restarting.
The stop gauge can be installed from four different corners to realize the requirement of putting steel bar from various directions.
TWO WORKING SPEED can satisfy the requirement of different steel bars with different tensile strenght.
The articulated type motor is convenient and fast to adjust.
The controlling table adopted rotary type which made the transportation and operation full of humanization.
Worry-saving:The main components last for 10 years, and main wear parts can last for 3 years, which cost you almost nothing for maintenance.
Time-Saving:The international advanced structure ensures the fastest bending speed.
Labor-saving:One machine to cut different sizes of steel bar without changing the blade.
Mode | Max.Bending Diameter | Rotation Speed | Power of motor | Dimension(mm) | weight(kg) | Control |
GW55D-1 | A3 steel 55mm Q235ob≤450MPa: 45mm /45#steel 45mm C45ob≤650MPa: 45mm |
10.5r/min 6.8r/min |
4kw-4p | 980x750x840 | 420 | Manual |
GW5D-2 | A3 steel 55mm Q235ob≤450MPa: 55mm /45#steel 45mm C45ob≤650MPa: 45mm |
10.5r/min 6.8r/min |
4kw-4p | 980x820x940 | 480 | Manual/ Automatic |