English
Currency CNY
Heater  silicon carbide  special door shape furnace buy in Dengfeng
Buy Heater silicon carbide special door shape furnace
Heater silicon carbide special door shape furnace

Heater silicon carbide special door shape furnace

Products from producer
In stock
Reconfirm the price with seller
Shipping:
Description

Heater silicon carbide special door shape furnace

1.The General Description of silicon carbide heating element

1) production process: made into blank, silicided under high temperature and re-crystallized.

2) character: high-applied temperature, anti-oxidization, anti-corrosion, long service life, little deformation, easy installation and maintenance.

3) usage: used in various high temperature electric furnaces and other electric heating devices, such as in the industries of magnet, ceramics, metallurgy, glass, and machinery.

4) physical properties of sic heating element

specific gravity 2.6~2.8g/cm³ bend strength >300kg
hardness >9 MOH′S Tensile strength >150kg/cm³
porosity rate <30% radiancy 0.85

5)Recommend surface load

Furnace Temp (°c ) 1100 1200 1300 1350 1400 1450
Surface load of hot zone (W/cm²) <17 <13 <9 <7 <5 <4


2.Electric property of silicon carbide heating element
Sic heating elementshave rather large specific resistance. When it is heated in air and the surface temperature of the hot zone reaches 1050°C, it's resistance rate is 600-1400mm2/mm and its resistance value changes as the temperature rises which is negative value from room-temperature to 800 °C and is postive value nature over 800 °C .

The key factor to the optimum service life of the element is to select the surface load of the element correctly according to the furnace construction, atmosphere and temperature. The figure shows the relation between furnace temperatures,element temperature and element surface load under the condition that the element radiation is not obstructed.

3. Advices of using silicon carbide heating element

1)In order to keep furnace temperature and the charges uniform of each element, before installation resistance distribution must be carried.

2) As the element is very brittle, be careful while install and maintain to avoid any damage.

3) when start to operate the furnace, raise voltage slowly and gradually, never give full load at one time.

4.When you place order, pls tell us following data

1)Outer diameter(OD):mm

2)Length of Hot zone(HZ):mm

3)Length of Cold end(CZ):mm

4)Length of Overall(OL):mm

5)Shank spacing(A):mm

6)Resistance (at 1050C+/-50C)

More than 20 years production experience.

Up to 1700 celsius high temperature.

All the resistance of sic heating element are tested twice to make sure the resistance is accurate.

All the specifications can be made according to your request.

Contact the seller
Heater silicon carbide special door shape furnace
Heater  silicon carbide  special door shape furnace
We recommend to see
Shipping method
Compare0
ClearSelected items: 0