Машина для производства санитарных видов бумаг

Paper machines for the production of sanitary paper Dekelon consist of a machine for the production of paper pulp, forming section, press section, drying section, finishing section and winding section. The raw materials are waste products, such as waste paper, wood-based cardboard, wheat and rice straw, wood, bamboo, oil cake, cotton and other fibrous plants. The machine is designed for the production of various sanitary and hygienic papers with different quality levels, from the lowest to the highest. Types of paper produced include napkins, paper kerchiefs, paper towels, cosmetic napkins in dispensers, toilet paper, etc.

Machines for the production of sanitary types of paper are designed for a one-storey work shop. They must be installed completely on the floor of the workshop. We offer a wide range of paper machines for sanitary paper, including 1092, 1575, 1760, 1880, 2100, 2400 and 2800. The auxiliary equipment should be selected taking into account weight, speed, productivity and other parameters.

Machines for the production of sanitary types of paper are designed for a one-storey work shop. They must be installed completely on the floor of the workshop. We offer a wide range of paper machines for sanitary paper, including 1092, 1575, 1760, 1880, 2100, 2400 and 2800. The auxiliary equipment should be selected taking into account weight, speed, productivity and other parameters.

Characteristics of the machine for the production of sanitary types of papers

   1. The wet part of the machine consists of a frame, a cantilever roll, an offset roller, a tensioning roller and a running roller. The machine does not contain vacuum suction devices, which helps prevent wear of the forming mesh and prolong the life of the machine.

   2. This machine has a number of conical tubes for feeding pulp and straightening rolls for forming a paper web. The paper mass is fed from the drive side and flows back from the working section, with a return flow rate of 10%.

   3. The wet part of this machine does not contain a gauch-shaft, nor does it require a gripping shaft, which greatly simplifies the control of the machine.

   4. Water is removed by means of two suction boxes, drying is carried out by a group of drying cylinders. After the drying process, the dryness of the paper will be 92-92%, after which the finished paper is fed to the winding machine for winding.

    5. The machine is usually installed at the end of the machine. It is equipped with a rack for working with reels of roll paper, which accommodates a paper roll with a diameter of 2800 mm and then transfers it directly to the unwinding and rewinding stand.