Product Information: HD1100D is a new AC powered plug-in explosive gas and Carbon Monoxide complex alarm with battery and zigbee or 433 MHz, GPRS signal.hereinafter called detector. It protects your family from the two deadly threats: carbon monoxide and other harmful gases such as natural gas-methane, LPG, LNG. The detector is with back-lit LCD digital screen continuously displays the level of natural gas (if any) the alarm is sensing and so as the carbon monoxide. The detector adopts MCU processing technology with a long life, convenient installation and high reliability. Besides, it completes with a special circuit that control the advanced semiconductor sensor and electro-chemical CO sensor’s efficiency level, and signals any possible fault.
HD1100D alarm is easily installed in any of your AC wall outlets or can be mounted higher on the wall using the power cord, backup battery is available.
HD1100D alarm has 4 status LED(power, warm up, fault and alarm indications) and
the large digital display are easy to read, informing you of alarm working status, gas
levels and the type of gas being detected.
HD1100D alarm has a control button for test(press) and rest (press and hold for
more than 5 seconds).
HD1100D alarm is calibrated to alarm before 30ppm/50ppm or as the customers
requirement for carbon monoxide sensor and before 7%LEL for natural gas, and it
can activate solenoid valves, sirens and any other signal or alarm handling device if
any, by means of the built in relay.
Application: HD1100D Detector is optimized for use by professionals with the two
deadly threads--carbon monoxide and natural gas leak detection and it is ideally suited
for use in private or social housing, such as bedrooms, hotels, hospitals and even
dormitory rooms where the carbon monoxide or natural gas pose a substantial hazard
if a leak occurs.
Features & Benefits
High reliability—Advanced semiconductor sensor
--Electro-chemical CO sensor
- -Professional low profile design
--With special circuit(MCU processing control and SMT manufacture
Technology).
-- Execute criterion: GB15322, EN50291, UL2034, EN50194
Easy to Install---Unit plugs directly into any wall outlet with power cord
Easy operation—Clearly visible status indications LEDS (power, preheat, fault and alarm) and LCD digital display. And voice alarm at the same time
--Button for test and rest: Test the alarm electronics and reset the unit
during alarm.
--Loud 85dB at 1m
Low total cost—Ideal for easy installation
--Direct connection to a solenoid valve
--5 years working life with 2 year guarantee.
Designed for residential environments—Slim, small, compact design with stylish
features, ideal for residential setting and modern decorations.
Technical Specifications:
Model: HD1100D
Detecting principle: Advanced semiconductor sensor & Electro-chemical CO sensor
Calibration gas: Methane/LPG/LNG and Carbon monoxide
Alarm level: 7%LEL and 50ppm
Accuracy: +/-3%LEL
Audible alarm level: 85dB at 1m
Visual indicator:
LCD display screen: displays the type of gas being detected and the gas level.
Blue LED indicates receiving electric power and operating properly.
Yellow LED illuminates alarm.
Red LED is fault LED means the gas detection sensor or circuit is not working
efficiently and must be replaced by an authorized service center.
Blue LED illuminates the buzzer works.
Button: For test units electronic circuit and horn and rests the units during alarm.
Operating environment:
Power supply: 110V-230VAC 50/60Hz.
Power consumption: 2.5W
Temperature: -10℃~+55℃
Humidity: ≤95%RH (no condensation)
Size: 118mm (L)×78mm(W) ×38mm(H)/ (4.6’’)L*3.1W’’*1.5’’H.
Net Weight: 330g
Wiring: plug-in
Lifetime/Warranty: 5years/ 2 years.